Paslode 902400 Instruction Manual

Cleaning ProcedurePart No. 902400www.paslode.comModel IM250A Li CORDLESS 16 GAUGE ANGLED LITHIUM-ION FINISH NAILER

10CombustionChamber(Cámara de combus-tíon)Sleeve (Camisa)Piston (Píston)Motor AssemblyConjunto del MotorNOTEAfter the tool is completely reassembled

11The maintenance interval for cleaning the Paslode Cordless 16 Gauge Angled Finish Nailer will vary depending upon the number of nails driven

An Illinois Tool Works Company888 Forest Edge Drive Vernon Hills, Illinois 60061 www.paslode.comPrinted in U.S.A. 902453

2This procedure provides a simple but effective way to clean your Paslode Cordless tool and maintain reliable operation. Regular cleaning and lubricat

3Step 2Remove the Cap, Filter, and Grill as one assembly, and set aside. The Filter may be removed by lifting the Grill off the Cap. Clean the Filter

4Step 4Rotate the Cylinder Head Assembly counter clockwise 1/8 of a turn and lift the cylinder head from the Motor Assembly.Paso 4Haga girar el conjun

5Step 6Spray the Cylinder Head with Cordless Tool Cleaner. AllowPaso 6Aplique limpiador de seguridad a latapa del cilindro.Permita que se esc

6Step 8Lightly lubricate the Seal Rings with Paslode Lu-bricating Oil, part #401482. Make sure oil is applied evenly around the Seal Rings. Set the C

7Step 10Spray a liberal amount of tool cleaner into the inside of the Sleeve and Combustion Chamber. Invert the Motor Assembly, and let excess cle

8 Step 12With Motor Assembly tilted up, squeeze 4-5 drops of Paslode Lubricating Oil into Sleeve (Area "A") and 3-4 drops onto lower li

9Step 14Manually push the Driver Blade up and down to distribute the oil in the Sleeve evenly.Reassemble the Paslode Cordless tool following dis-assem